X-NUCLEO-GFX02Z1 top view.
Picture is not contractual.
Features
• 2.2” 8-bit parallel interface QVGA TFT LCD
• 64-Mbit Q-SPI NOR Flash memory
• Joystick for easy menu navigation
• Compatible with selected STM32 Nucleo-144 boards using the Zio connector
Description
The X-NUCLEO-GFX02Z1 expansion board adds graphic user interface (GUI)
capability to STM32 Nucleo-144 boards.
It features a 2.2” 8-bit parallel interface TFT display as well as a 64-Mbit Q-SPI NOR
Flash memory for storing graphic images, texts and texture. The expansion board
also offers a joystick for GUI navigation.
X-NUCLEO-GFX02Z1 features the Zio connector. It is compatible with the NUCLEO-
F412ZG, NUCLEO-F413ZH, NUCLEO-F446ZE, NUCLEO-F722ZE, NUCLEO-
F746ZG, NUCLEO-F756ZG, NUCLEO-F767ZI, NUCLEO-H743ZI, NUCLEO-
H723ZG, NUCLEO-H753ZI, NUCLEO-H745ZI-Q, NUCLEO-H755ZI-Q, NUCLEO-
H7A3ZI-Q, NUCLEO-L496ZG, NUCLEO-L496ZG-P, NUCLEO-L4A6ZG, NUCLEO-
L4P5ZG, NUCLEO-L4R5ZI, NUCLEO-L4R5ZI-P, NUCLEO-L552ZE-Q and NUCLEO-
U575ZI-Q Nucleo-144 boards.
Product status link
X-NUCLEO-GFX02Z1
Display expansion board for STM32 Nucleo-144
X-NUCLEO-GFX02Z1
Data brief
DB4533 - Rev 1 - September 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
1 Ordering information
To order the X-NUCLEO-GFX02Z1 expansion board, refer to Table 1.
Table 1. Ordering information
Order code Board reference User manual
X-NUCLEO-GFX02Z1 MB1818 UM2905
The STM32 Nucleo-144 boards feature STM32 32-bit microcontrollers based on the Arm
®
Cortex
®
‑M processor.
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
1.1 Product marking
The stickers located on the top or bottom side of the PCB provide product information:
• Product order code and product identification for the first sticker
• Board reference with revision, and serial number for the second sticker
On the first sticker, the first line provides the product order code, and the second line the product identification.
On the second sticker, the first line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx” is the board
reference, “Variant” (optional) identifies the mounting variant when several exist, "y" is the PCB revision and "zz"
is the assembly revision, for example B01. The second line shows the board serial number used for traceability.
Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference
design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will
be liable for any customer usage of these engineering sample tools as reference designs or in production.
“E” or “ES” marking location is next to the evaluation tool ordering part number that is stuck or silk-screen printed
on the board.
X-NUCLEO-GFX02Z1
Ordering information
DB4533 - Rev 1
page 2/5
