DT69681V3
NUCLEO-C092RC (left) and NUCLEO-H533RE (right) examples. Boards with different references show different layouts. Pictures are not
contractual.
Product status link
NUCLEO-xxxxCx
NUCLEO-C031C6, NUCLEO-C051C8
NUCLEO-xxxxRx
NUCLEO-C071RB, NUCLEO-C092RC, NUCLEO-F030R8, NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC, NUCLEO-F103RB,
NUCLEO-F302R8, NUCLEO-F303RE, NUCLEO-F334R8, NUCLEO-F401RE, NUCLEO-F410RB, NUCLEO-F411RE, NUCLEO-F446RE,
NUCLEO-G070RB, NUCLEO-G071RB, NUCLEO-G0B1RE, NUCLEO-G431RB, NUCLEO-G474RE, NUCLEO-G491RE, NUCLEO-H503RB,
NUCLEO-H533RE, NUCLEO-L010RB, NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L152RE, NUCLEO-L452RE, NUCLEO-L476RG,
NUCLEO-U031R8, NUCLEO-U083RC
NUCLEO-xxxxRx-P
NUCLEO-L412RB-P, NUCLEO-L433RC-P, NUCLEO-L452RE-P
NUCLEO-xxxxRx-Q
NUCLEO-U385RG-Q, NUCLEO-U545RE-Q
STM32 Nucleo-64 boards
NUCLEO‑xxxxCx NUCLEO‑xxxxRx
NUCLEO‑xxxxRx‑P NUCLEO‑xxxxRx‑Q
Data brief
DB2196 - Rev 21 - January 2025
For further information contact your local STMicroelectronics sales office.
www.st.com
Features
Common features
• STM32 microcontroller in an LQFP64 or LQFP48 package
• 1 user LED shared with ARDUINO
®
• 1 user and 1 reset push-buttons
• 32.768 kHz crystal oscillator
• Board connectors:
– ARDUINO
®
Uno V3 expansion connector
– ST morpho extension pin headers for full access to all STM32 I/Os
• Flexible power-supply options: ST-LINK USB V
BUS
or external sources
• Comprehensive free software libraries and examples available with the STM32Cube MCU Package
•
Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench
®
, MDK-
ARM, and STM32CubeIDE
Features specific to some of the boards
(refer to the ordering information section of the data brief for details)
• Second user LED
• External or internal SMPS to generate V
core
logic supply
• 24 MHz or 48 MHz HSE
• User USB Device full speed, or USB SNK/UFP full speed
• Cryptography
• CAN FD transceiver
• Board connectors:
– External SMPS experimentation dedicated connector
– USB Type-C
®
, Micro-B, or Mini-B connector for the ST-LINK
– USB Type-C
®
user connector
– MIPI
®
debug connector
– CAN FD header
• On-board ST-LINK (STLINK/V2-1, STLINK-V3E, STLINK-V2EC, or STLINK-V3EC) debugger/programmer with USB re-
enumeration capability: mass storage, Virtual COM port, and debug port
NUCLEO‑xxxxCx NUCLEO‑xxxxRx NUCLEO‑xxxxRx‑P
NUCLEO‑xxxxRx‑Q
DB2196 - Rev 21
page 2/12
