Introduction
The STM32L562E-DK Discovery kit is designed as a complete demonstration and development platform for the
STMicroelectronics
Arm
®
Cortex
®
-M33 core-based STM32L562QEI6Q microcontroller with TrustZone
®
. It features 256 Kbytes
of internal SRAM and 512 Kbytes of internal flash memory, one flexible memory controller (FMC) interface, one Octo‑SPI
memory interface, one TFT-LCD controller, one RTC, up to 16 timers, one USB Type-C
®
device FS port with UCPD controller,
two
SAI ports, four I
2
C buses, six USART ports, three SPIs, one CAN‑FD port, one SDMMC interface, 2x 12-bit ADC, 2x 12-bit
DAC, two low-power comparators, four digital filters for sigma-delta modulation, touch-sensing capability, an embedded step-
down converter, and
JTAG and ETM debugging support.
STM32L562E-DK, shown in Figure 1, associated with the fanout expansion board, is used as a reference design for user
application development, although it is not considered as the final application.
The full range of hardware features on the board helps the user to evaluate all the peripherals (USB, USART, digital
microphones, ADC and DAC, TFT LCD, Octo‑SPI flash memory device, microSD
™
card, audio codec, joystick, user button,
Bluetooth
®
Low Energy, accelerometer and gyroscope) and to develop applications. Extension headers allow easy connection
of a daughterboard or wrapping board for a specific application.
An STLINK-V3E is integrated on the board, as an embedded in-circuit debugger and programmer for the STM32 MCU and the
USB
Virtual COM port bridge.
Figure 1.
STM32L562E-DK Discovery kit (top view)
Picture is not contractual.
Discovery kit with STM32L562QE MCU
UM2617
User manual
UM2617 - Rev 7 - October 2023
For further information contact your local STMicroelectronics sales office.
www.st.com
1 Features
• STM32L562QEI6Q microcontroller featuring 512 Kbytes of flash memory and 256 Kbytes of SRAM in a
BGA132 package
• 1.54" 240 × 240 pixel-262K color TFT-LCD module with a parallel interface and touch‑control panel
• USB Type-C
®
Sink device FS
• On-board energy meter: 300 nA to 150 mA measurement range with a dedicated USB interface
• SAI audio codec
• MEMS digital microphones
• 512-Mbit Octo‑SPI flash memory
•
Bluetooth
®
Low Energy V4.1 module
• iNEMO 3D accelerometer and 3D gyroscope
• Two user LEDs
• User and reset push-buttons
• Board connectors:
–
USB Type-C
®
–
microSD
™
card
– Stereo headset jack including analog microphone input
– JTAG debugger
– DPM dynamic-power measurement interface for external device
– STMod+ expansion connector with fanout expansion board for Wi‑Fi
®
, Grove, and mikroBUS
™
compatible connectors
– Pmod
™
expansion connector
– Audio MEMS daughterboard expansion connector
– ARDUINO
®
Uno V3 expansion connector
• Flexible power-supply options: ST-LINK USB V
BUS
, USB connector, or external sources
• On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the STM32CubeL5 MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
Note: Arm and TrustZone are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2617
Features
UM2617 - Rev 7
page 2/64
